We are migrating products from our old website - www.destiny-electronic.com.my
Latest Products
Sort by
Show result
  • Fiber, FR4 material grade
  • Tinned copper
  • Suitable for prototyping
RM20.80
RM45.00
  • Infrared Reflector, TCRT5000L
  • Operating Voltage: 3 to 5Vdc
  • Analog Output (Voltage)
  • Detection Distance: 15mm
  • Pins Definition (3P Connector): Vcc, Out, GND
  • Easy to use and Cost Effective
RM19.95
RM25.00
  • Infrared Receiver, ZX-IRM
  • Operating Voltage: 5Vdc
  • Frequency: 38khz
  • Digital Output
  • Pins Definition (3P Connector): Vcc, Out, GND
  • Returns a logic “1” when no signal is detected.
  • Returns a logic “0” when a light signal is detected.
  • Active with logic '0' or data changable at 1,200 times per second.
  • Easy to use and Cost Effective
RM10.95
RM15.00
  • Infrared Emitter
  • Operating Voltage: 5Vdc
  • Frequency: 38khz
  • Digital Output
  • Drive with logic High at TTL Level
  • Pins Definition (3P Connector): Vcc, Out, GND
  • Transmission Range: 5 to 10m
  • 2-mode Operation: Continuous Drive or Frequency Drive
  • Continuous Drive: In this mode, the IR-LED will receive a forward bias to drive the infrared rays. Use with the Inex Photo-transistor board for measuring the infrared light density.
  • Frequency Drive: This mode will modulate a 38kHz carrier frequency into the IR-LED. (Can be used with the Inex 38kHz Infrared Receiver Module which is not included).
  • Easy to use and Cost Effective
RM19.95
RM25.00
  • Infrared Emitter
  • Operating Voltage: 5Vdc
  • Frequency: 38khz
  • Digital Output
  • Drive with logic High at TTL Level
  • Pins Definition (3P Connector): Vcc, Out, GND
  • Transmission Range: 5 to 10m
  • 2-mode Operation: Continuous Drive or Frequency Drive
  • Continuous Drive: In this mode, the IR-LED will receive a forward bias to drive the infrared rays. Use with the Inex Photo-transistor board for measuring the infrared light density.
  • Frequency Drive: This mode will modulate a 38kHz carrier frequency into the IR-LED. (Can be used with the Inex 38kHz Infrared Receiver Module which is not included).
  • Easy to use and Cost Effective
RM6.95
RM15.00
  • Automatic voltage stabilizer
  • Delay time function
  • Low / high voltage protection
  • Circuit breaker protection
  • Input / output voltage display
  • 1 outlet & 1x wire Input
  • Handheld case
RM390.00
RM610.00
  • Distance Measuring Range: 20 to 150cm / 10 to 80cm / 4 to 30cm
  • Analog Output
  • Operating Voltage: 4.5 to 5.5V
  • Consumption Current: 33mA
  • 3 Pins
  • Dimensions: 29.5 x 13 x21.6 mm
RM24.95
RM40.00
  • Frequency: 38kHz
  • Wavelength: 940nm
  • Operating Voltage: 5V
  • 4 Emission Direction
  • Digital Output
  • Transmission Distance: up to 3m
  • Pins Definition (3 Pins): GND, Vcc, DAT
  • Dimensions: 35 x 35mm
RM12.95
RM30.00
  • Suitable for 5 - 400Vac/Vdc inductive loads (Less than 1000w load)
  • Built-In RC Snubber Circuit
  • Varistor to Prevent Large Excessive Current / Voltage Fluctuation
  • Protection on Electromagnetic Interference,, Anti-Interference
  • 2P Terminal Connection
  • Easy to use and Cost Effective
RM7.95
RM30.00
  • Operating Voltage: 3.3V / 5Vdc
  • Mechanical Angle: 270 Degrees
  • Resistance: 10k ohm
  • Analog Output (0 to Vcc)
  • Pins Definition (3 Pins): OUT, Vcc, GND
  • Easy to use and Cost Effective
RM10.95
RM30.00
  • Operating Voltage: 3.3V / 5Vdc
  • Mechanical Angle: 270 Degrees
  • Resistance: 10k ohm
  • Analog Output (0 to Vcc)
  • Pins Definition (5 Pins): OUT, Vcc, GND
  • Easy to use and Cost Effective
RM10.95
RM30.00
  • Operating Voltage: 3.3V / 5Vdc
  • Mechanical Angle: 360 Degrees
  • Output: Pulse Level
  • Positions per Revolution: 20
  • Pins Definition (9 Pins): OTS, Vcc, GND, OTB, Vcc, GND, OTA, Vcc, GND
  • Easy to use and Cost Effective
RM16.95
RM30.00
  • Operating Voltage: 5Vdc
  • Mechanical Angle: 360 Degrees
  • Output: 2-bit gray code (Digital)
  • Positions per Revolution: 30
  • Pins Definition (5 Pins): GND, +5V, SW, DT, CLK
  • Easy to use and Cost Effective
RM5.95
RM30.00
  • Coded Disc, 20 holes
  • Diameter: 25.8mm
  • Hole Diamter: 1.2mm
  • Applications: Motor Speed (RPM), Workpiece Couting
  • Easy to use and Cost Effective
RM1.50
RM30.00
  • Infrared Detection Technology (Vertical)
  • Operating Voltage: 5Vdc
  • Digital Output
  • Infrared Detection Area: 10mm
  • Pins Definition: Vcc, GND, OUT
  • Detection Frequency: > 100kHz
  • High Performance Stability
  • Anti-Jamming Capability
  • Applications: Motor Speed (RPM), Workpiece Couting
  • Easy to use and Cost Effective
RM14.95
RM30.00