We are migrating products from our old website - www.destiny-electronic.com.my
RM29.95 RM50.00
Micro Digital Temperature Control Module, Single Zone, 12VDC, 24VDC, 110-240VAC [22521921 - 22521923]
Price RM29.95 RM50.00
Brand China OEM
Availability In Stock
Operating voltage, Stock code
Quantity
Description
Highlight
  • Wide temperature range, -50 - 110ºC
  • 0.1ºC resolution
  • Compact type
  • Easy to use

Operating Voltages, Stock Code:

12VDC 22521922
24VDC 22521923
110-240VAC 22521921

 

 

Micro Digital Temperature Control Module, Single Zone, XH-W3002, 12VDC, 24VDC, 110-240VAC

The temperature control module has a control range of -50 to 110ºC with an measurement accuracy of 0.2°C.

 

 

Features:  

  • Wide temperature range, -50 - 110ºC
  • 0.1ºC resolution
  • Compact type
  • Easy to use

 

 

Tech Specs:  

Attribute Value
Package Module
Operating Voltage Options 12VDC, 24VDC, 110-240VAC
Type Digital
Number of Outputs 1, Single Zone
Control Output Power 12VDC: 120W
24VDC: 240W
110-240VAC: 1500W
Measurement & Control Range -50 - 110ºC
temperature Measurement Accuracy ±0.2ºC
Temperature Control Accuracy ±0.1ºC
Display Type Segment Digital Display
Input Temperature Probe NTC10K (B3950) waterproof type, 1 meter length
Dimension 60 x 45 x 31mm
Mounting Dimension 73mm

 

 

Module Button Layout:

 

 

Instructions:

Parameters Description Setting Range Factory Setting Values
P0 Lower-limit temperature -50 - 110ºC 25ºC
P1 Upper-limit temperature -50 - 110ºC 40ºC
P2 Temperature offset -10-10ºC 0ºC
P3 ON time delay 0-10 minutes 0

 

Setting P0, lower-limit temperature

  1. Press Setting Key once, and the display shows P0 parameter.
  2. Press Setting Key again to go to Initial Setting Level.
  3. Use the Up / Down Key to set values for P0 parameter.

 

Setting P1, upper-limit temperature

  1. Press Setting Key once, and the display shows P0 parameter.
  2. Use Up / Down Key to change to another parameter, P1.
  3. Press Setting Key again to go to Initial Setting Level.
  4. Use the Up / Down Key to set values for P1 parameter.

 

Setting P2, temperature offset

Temperature offset is a feature that lets you adjust the room temperature reading.

This helps if the temperature control module is in a slightly warm or cold spot, or if the room temperature does not match your old thermostat.

Equation: temperature offset = room's actual ambient temperature - temperature measured

  1. Press Setting Key once, and the display shows P0 parameter.
  2. Use Up / Down Key to change to another parameter, P2.
  3. Press Setting Key again to go to Initial Setting Level. 
  4. Use the Up / Down Key to set values for P2 parameter.

 

Setting P3, ON time delay

ON time delay is generally required for a refrigerator compressor.

  1. Press Setting Key once, and the display shows P0 parameter.
  2. Use Up / Down Key to change to another parameter, P3.
  3. Press Setting Key again to go to Initial Setting Level. 
  4. Use the Up / Down Key to set values for P3 parameter.

 

 

Instructions and Wiring Diagram:

  1. Connect a power supply and devices to be controlled to the module.
  2. Press Setting Key for at least 3 sec to go to Initial Setting Level and the display flashes.
  3. Use the Up / Down Key to set values for P0 parameter and wait for at least 5 sec for the module to save the values.
  4. Press Setting Key for at least 3 sec to go to Initial Setting Level and the display flashes.
  5. Use the Up / Down Key to set values for P1 parameter and wait for at least 5 sec for the module to save the values.

Note: To do a factory reset, press Up and Down Key for at least 5 seconds. The display shows 888 when a factory reset is completed.

 

 

Troubleshooting:

  1. Check the error.
  2. Error Code "LLL", the sensor is at open circuit state. Replace the sensor.
  3. Error Code "HHH", the sensor is at short circuit state. Replace the sensor.

 

 

Dimensions:

 

 

Useful Videos:


 

What's in the box
  • 1x Temperature Control Module