We are migrating products from our old website - www.destiny-electronic.com.my
Processor & Microcontroller Development Kits
Sort by
Show result
  • Compatible for 1602 LCD
  • IIC / I2C / TWI / SPI 
RM5.95
RM11.90
  • ATmega32u4
  • 20 digital input / output pins (of which 7 can be used as PWM outputs and 12 analog inputs)
  • a 16Mhz quartz crystal
  • a micro USB connection
  • a power jack
  • an ICSP header
  • a reset button
RM45.95
RM91.90
  • ATmega2560
  • 54 digital input / output pins (of which 15 can be used as PWM outputs)
  • 16 analog inputs
  • 4 UARTs
  • a 16Mhz crystal oscillator
  • a USB connection
  • a power jack
  • an ICSP header
  • a reset button
RM80.00
RM160.00
  • ATmega2560
  • 54 digital input / output pins (of which 15 can be used as PWM outputs)
  • 16 analog inputs
  • 4 UARTs
  • a 16Mhz crystal oscillator
  • a USB connection
  • a power jack
RM59.90
RM99.90
  • ATmega328
  • 22 digital I/O pins (6 of which are PWM)
  • 8 analog in pins
  • a 16Mhz crystal oscillator
  • a Mini-B USB connection
RM16.50
RM29.90
  • ATmega32u4 @ 5V 16 MHz
  • On-Board micro-USB connector for programming
  • 12 digital I/O pins (of which 5 are PWM capable)
  • 9 x 10-bits ADC pins
  • Rx and Tx hardware serial connections
RM25.95
RM51.90
  • ATmega328
  • 14 digital I/O pins
  • 6 PWM pins
  • 1 UART
  • 1 SPI
  • 1 I2C
  • 6 analog input pins
  • 8 MHz (3.3V versions) or 16 MHz (5V versions)
  • A six pin header can be connected to an FTDI cable to provide USB power and communication to the board.
RM19.95
RM39.90
  • Data Transmission rate: up to 10Mbit/s
  • Max. current: < 30mA
RM9.90
RM19.80
  • Data Transmission rate: up to 10Mbit/s
  • Max. current: < 30mA
RM9.90
RM19.80
  • Support I2C, SPI and HSU (High Speed UART)
  • Reading distance: 5 -7cm
RM45.00
RM90.00
  • Max. reading distance: 50mm
  • Less than 100ms decoding time
  • UART interface
  • Support EM4100 compatible read only or read/write tags
RM19.95
RM39.90
  • 1x robot chassis
  • 1x Arduno Uno R3
  • 1x sensor shield
  • 1x servo motor
  • 1x ultrasonic sensor
  • 1x L298 motor driver
RM75.95
RM140.00
  • 1x robot chassis
  • 1x Arduno Uno R3
  • 1x sensor shield
  • 1x servo motor
  • 1x ultrasonic sensor
  • 1x L298 motor driver
RM95.95
RM160.00
  • DIP ATmega328P
  • 14 digital input / output pins
  • 6 analog inputs
  • a 16Mhz quartz crystal
  • a USB connection
  • a power jack
RM28.95
RM38.95
  • SMD ATmega328P
  • 14 digital input / output pins
  • 6 analog inputs
  • a 16Mhz quartz crystal
  • a USB connection
  • a power jack
RM19.95
RM38.95