We are migrating products from our old website - www.destiny-electronic.com.my
RM29.95 RM60.00
Single UART with I2C-bus/SPI Interface, SC16IS750 [10720132]
Price RM29.95 RM60.00
Brand China OEM
Availability In Stock
Quantity
Description
Highlight
  • Chipset: SC16IS750
  • Operation Voltage: 2.5V/3Vdc
  • Pin Definition (2x11 Pins): Left; I2C-/SPI, A0-/CS, A1-SI, NC-SO, SCL-SCK, SDA-VSS, /IRQ, IO0, IO1, IO2, Vin
  • Right; GND, RESET, RX, TX, CTS, RTS, IO7, IO6, IO5, IO4, IO3
  • Selectable I2C bus / SPI Interface
  • Baud rates up to 5 Mbit/s in 16x clock mode
  • 64 bytes FIFO (Transmitter and Receiver)
  • Automatic RS485 Support (Auto slave address detection)
  • Low Operating and Sleeping Current
  • Using with Arduino or Raspberry Pi

Stock Code: 10720132

 


Single UART with I2C-bus/SPI Interface, SC16IS750

This breakout board, SC16IS750 allows the conversion of I2C or SPI signals to a single channel UART. It has internal registers that can be accessed to control the behavior of the UART and that may be used to read or write data that is available on the serial port. It is a small module, widely used with Arduino (or any other microcontroller & microprocessor) for UART interfacing.

 

Features:

  • Chipset: SC16IS750
  • Operation Voltage: 2.5V/3Vdc
  • Pin Definition (2x11 Pins): Left; I2C-/SPI, A0-/CS, A1-SI, NC-SO, SCL-SCK, SDA-VSS, /IRQ, IO0, IO1, IO2, Vin
  • Right; GND, RESET, RX, TX, CTS, RTS, IO7, IO6, IO5, IO4, IO3
  • Selectable I2C bus / SPI Interface
  • Baud rates up to 5 Mbit/s in 16x clock mode
  • 64 bytes FIFO (Transmitter and Receiver)
  • Automatic RS485 Support (Auto slave address detection)
  • Low Operating and Sleeping Current
  • Using with Arduino or Raspberry Pi

 

[source: https://os.mbed.com/components/SC16IS750-I2C-or-SPI-to-UART-bridge/]

 


Tech Specs:

Attribute Values
Module Type I2C/SPI To UART
Chip SC16IS750
Interface Type Single Channel UART
Operating Voltage 2.5V/3.3Vdc
Left Pins I2C-/SPI, A0-/CS, A1-SI, NC-SO, SCL-SCK, SDA-VSS, /IRQ, IO0, IO1, IO2, Vin
Right Pins GND, RESET, RX, TX, CTS, RTS, IO7, IO6, IO5, IO4, IO3
Dimension 30 x 25 mm
Maximum Operating Temperature 85ºC
Minimum Operating Temperature -40ºC

 

What's in the box

1x UART with I2C-bus/SPI interface breakout board